SCULPFUN S6 Pro / S9 / S10 Air Assist Nozzle Kit, High Speed Air Assist, Full Metal Structure

Note

1. Because of the powerful laser with air assist, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
2. For detailed machine instructions, please refer to the manual for parameter settings.
3. When operating the laser engraving machine, please wear protective goggles.
4. Do not touch the laser with your hands, otherwise, you may burn your hands.
5. Please avoid a strong impact on the machine.
6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adults' attention.
7. Do not use the laser directly on any specular reflection object, which may cause injury to the operator or burn the laser.
Air pump selection suggestion: Recommended to choose air pump of ≥30L/min, and the outer diameter of the air pump interface is around 8mm.

Highlights

Official SCULPFUN S9 Air Assist
This is a standard S9 air assist nozzle designed by SCULPFUN, it is an all-metal structure and fits perfectly with the S9 laser. You only need a few minutes to install it.
High-speed Air Assist Nozzle
Like the S10 nozzle, it is a high-speed air-assist nozzle with an advanced fluid mechanics design. Only a 30L/min air pump can achieve a high-speed airflow of 13.5m/s.
Faster and Cleaner Cutting
S9 air assist will greatly improve the cutting ability of the S9 laser. With air-assist S9 cuts plywood and MDF boards 2-3 times faster, and cutting surfaces are cleaner and have no smoky.
Excellent Air Sealing
The S9 nozzle has a sealing ring, and the air of the air pump will not leak from the gap. In addition, the sealing keeps out dust, which will increase the lifespan of the S9 lens.
Complete Accessories
The product includes SCULPFUN S9 air assist nozzle, air pipe, sealing ring, and other installation accessories you need. You don't need to buy additional accessories except for the air pump, directly to upgrade the S9 machine.

Specification