SCULPFUN S30 Ultra 22W Laser Cutter

Highlights

SCULPFUN S30 Ultra 22W Laser Cutter Main Features

Auto air-assisted, the SCULPFUN S30 Ultra 22W laser engraver sports a giant engraving size of 600*600m. Coupling an upgraded linear guide rail with a focus spot of 0.08x0.10mm, the S30 Ultra allows you to create custom engraved products with a wide variety of materials at the best possible accuracy.

• 600x600mm engraving area 
• 0.08x0.10mm focus spot 
• Cut15mm balsa wood and 10mm plywood in one pass 
• 42-bit stepping motor
• Replaceable protective lens
• 0.005mm Industrial-grade cutting precision

600x600mm Large Engraving Area

Designed with a large engraving area of 600x600mm, the SCULPFUN S30 Ultra 22W Laser is capable of completing large-scale cutting works and there will be no need to upgrade in future use.

Enhanced 22W Laser Power

S30 Ultra 22W laser can cut 15mm balsa wood and 10mm plywood separately by one pass, bringing you a faster engraving and cutting experience.

Enhanced 42-bit Stepping Motor

Adopting a 42-bit stepping motor, the S30 Ultra 222W laser provides sufficient power for the machine to move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.

Built-in High-pressure Air-assisted Nozzle

S30 Ultra series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.

Replaceable Protective Lens

S30 Ultra series laser engraver uses an innovative replaceable lens, which greatly improves the service life of the laser, and is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power.

Upgraded 32-bit Air-assisted Motherboard

The latest 32-bit motherboard supports an automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.

Industrial-grade Cutting Precision

S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.

Professional Safety Design

It is equipped with an emergency stop switch and a safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.

One Series One Structure

S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, you only need to replace the laser head without any other changes.

Tool Box, Laser Repair Box, Fixed-focus Column Holder

S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.

Solid and Durable Frame

Made of high-strength aluminum alloy, its frame can withstand a weight of up to 50kg without damage, which is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.

Note

1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.
2. For detailed machine instructions, please refer to the manual for parameter settings.
3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
4. Do not touch the laser with your hands, otherwise, you may burn your hands.
5. Please avoid a strong impact on the machine.
6. t is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.
7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

SCULPFUN S30 Ultra - One Step To Achieve The Best Engravings 

• 600*600mm Engraving Size - most ideas can be realized. 
• 11W/22W/33W Laser Power - new diode technology.
• Upgraded Linear Slide - precise and fast 
• Automatic Air Assist - cleaner cuts

600*600mm Engraving Area

SCULPFUN S30 Ultra sports an extra large engraving area of 600x600mm, which saves the trouble of accessorizing an extension kit in the future when large-scale cutting is required.

Upgraded Safety

SCULPFUN S30 Ultra is dotted with an emergency switch that will stop the machine immediately once you press it. Pulling out the key, the machine will not be turned on, preventing children from turning it on by mistake.

Easy To Upgrade

SCULPFUN S30 Ultra machine structure is almost perfect, no upgrades are required, and can be used for a long time. When upgrading the laser power in the future, users only need to replace the laser head, other parts replacements are required. 

*SCULPFUN S30 Series use the same structure, cable management, air pump, and power adapters. 

SCULPFUN S30 Ultra Series - 3 Power Options

11W - Cut 10mm balsa wood and 6mm plywood in one pass. 
22W - Cut 15mm balsa wood and 10mm plywood in one pass. 
33W - Cut 20mm balsa wood and 15mm plywood in one pass.

Accessories That Bring Ease To Your Life 

Cylinder seat 
Laser repair tool
Nozzle clean tool 

Automatically Controller Air Assist ( M8)

SCULPFUN S30 Ultra is equipped with an air-assisted 32-bit motherboard and a control-type air pump, which will intelligently control the air assist ON or OFF (Lightburn M8 Air Assist Switch).

22W - Powerful Quad-laser Technology

Single 6W Diode x 4

22W Laser Power 

SCULPFUN S30 Ultra 22W laser engraving machine deals with 18 mm thick wood, 15mm thick acrylic, and 0.05mm thick metal with ease. You can also colorize your metal engravings. 

Replaceable Lens - Long Service Laser 

Sculpfun S30 Ultra 22w laser module adopts the replaceable design. After long-term use or if the lens is damaged, it can be replaced to recover the power. This will greatly improve the service life of the laser, which is more than 10 times higher than ordinary lasers.

Laser Repair Kit

Sculpfun S30 Ultra provides a free laser repair kit in the package, including a lens, sealing ring, tweezers, screws, and wrench, when your laser has a problem, it can be repaired in time and thus greatly extending the service life.

Built-in High-Pressure Air-Assist Nozzle

SCULPFUN 30 Ultra 22w nozzle is powered by an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the SCULPFUN S30 Ultra sprays airflow faster. 

Upgraded 0.005mm high precision heavy-duty linear guide rail

allows SCULPFUN S30 Ultra to move quickly, smoothly, and accurately.  Moreover, it bears more weight. 

Back Opening Window Design - Helps blow the smoke to the back quickly.
HD Protection Glass - Effectively blocks the dazzling light. Convenient for observation. 

32-Bit Air Assist Mainboard

SCULPFUN S30 Ultra motherboard supports the automatic air assist control function ( Lightburn M8 Switch) and reserves the SD Card offline control function. ( Sold separately as an upgrade kit. )

Upgraded 4.2kg.cm Stepper Motor

Strengthened 4.2 Kg- cm 42-bit step motor provides sufficient power to expedite the movement of the machine. 

Automatic Air Pump In The Package

SCULPFUN S30 Ultra comes with a durable automatic air pump in the package that outputs 30L/min airflow steadily. It works with the 32-bit air assist mainboard to avail the automatic air assist (Lightburn M8 Air Assist).

Specification