Categories

SCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean Cutting, for SCULPFUN S30 Pro, S6, S6 Pro, S9

Brand: SCULPFUN 4Answered Questions Item Code:518084
$254.00Exclusive app price!
Download APP

Add this item to your cart and then purchase it on our app to save $5.00

G-coin
Get Now
G-coin
QTY: In Stock
Shipping:
Add to Cart Buy Now
28
Bulk Order Rebate
Ship to:
Hong Kong,China
Select the desired shipping method
Shipping Company Estimated Delivery Time Shipping Cost
*Please note: the shipping costs are only estimates; the actual shipping price will be shown on the order page.
0 item(s) added
View CartContinue Shopping
Buy Together & Save

SCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean Cutting, for SCULPFUN S30 Pro, S6, S6 Pro, S9

$259.00
Selected: 0

Total Price: $259.00

=

Note

1. Because of the powerful laser of the S30 Pro, it is forbidden to run the engraving machine unattended. Pause it if you're not around.

2. For detailed machine instructions, please refer to the manual for parameter settings.

3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.

4. Do not touch the laser with your hands, otherwise, you may burn your hands.

5. Please avoid a strong impact on the machine.

6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attention.

7. Do not use the laser directly on any specular reflection object, which may cause injury to the operator or burn the laser.

Highlights

Built-in High-pressure Air-assisted Nozzle
It is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean.

Replaceable Protective Lens
This laser module adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than that of other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Ultra-fine and High-density 10W Laser 
The laser power of the S30 Pro is increased to 10W, which is twice that of the S9. But getting the same 0.08mm focus ultra-fine laser beam as the S9 means that the S30 Pro has higher energy density, stronger cutting penetration, and engraving capabilities.

Universal 12V/PWM Modulation Board
It uses a common 12V/PWM modulation board, which can be adapted to common GRBL or CNC motherboards.

Faster, Stronger & Cleaner
Combining advanced high-speed air assist and a 10W high-energy-density laser, the S30 Pro reflects industrial-grade wood cutting performance: first, the cutting efficiency is greatly improved, and the cutting is faster; second The cutting penetration is stronger, and many kinds of high-density wood can be cut; the third is that the cutting surface is cleaner, and the powerful airflow blows away the residue so that the surface of the cutting object is free of any stains.

Highly Compatible Design
It can be installed on various brands of machines, such as SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, ORTUR (12V version) laser engraving machines, or other DIY-type machines.

Detachable Laser Protection Cover
The S30 Pro Laser Module is equipped with a detachable protection cover, which will not dazzle even without glasses. Also if you don't need it, you can easily disassemble it.

SCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean CuttingSCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean Cutting

Specification

General

Brand: SCULPFUN
Type: Laser Module Kit
Model: S30 Pro
Compatible Models: SCULPFUN S30 Pro, S6, S6 Pro, S9 or other brands of engraving machines

Specification

Laser Output Power: 10W (light energy)
Inner Diameter of Air Pipe: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out the diameter of nozzle: 8mm)
Laser Wavelength: 455±5nm
Laser Type and Fixed Focus: fixed focus laser, fixed focus through 50mm measuring column
Laser Protection Cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.
Laser Shell Material: aluminum alloy

Laser Circuit Board Parameters:
Circuit Board Size: 40*40mm
Circuit Board: 12V/PWM modulation board
Input Voltage: 12V
Max Input of Laser Module: 12V 5A
Wire Rod: HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan: 12V 0.15A 4020 fan
Fan Speed: 15000 rpm
Operating Temperature: -20 to 70 Celsius

Engraving Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, and dark stone.
Cutting Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, and PCB boards.

Weight & Size

Package Weight: 0.85kg
Package Size(L x W x H): 315*160*135mm

Package Contents

1 x S30 Pro Laser Head
1 x 7.5mm Inner Diameter Air Tube
1 x Acrylic Protective Cover
1 x Multi-function Connector
1 x 50mm Measuring Column
1 X Screw and Tool Kit

 

Customer Photos

Customer Videos

Be the first to Upload A Video of this product!

Customer Reviews

5out of 5
5 star 5
4 star 0
3 star 0
2 star 0
1 star 0
Write A Review See all 5 reviews
All (5)
Images (1)
Videos (0)

        Questions & Answers

        Support & Firmware

        Learn More

        SCULPFUN S30 Pro 10W Laser Module Kit, Fixed Focus, Built-in Air Assist, Replaceable Lens, Clean Cutting, for SCULPFUN S30 Pro, S6, S6 Pro, S9
        We ensure to all customers that GeekBuying will offer the most competitive price online

        Please fill in the blank and submit it if you found this product sold elsewhere for a lower price. We will work with suppliers to lower down the price as much as we can, and you will receive an email afterwards.

        Your trust and support are highly appreciated.

        Item Code: 518084
        The filed E-mail is required

        Please make sure the information above is filled in correctly so we can offer you an accurate discount. Our wholesale department will get back to you within 24 hours.

        Great, You report on this product has been sent to us. Product info will updated if we can work with our supplier to lower the price(Normally in 48 hours Mon- Fri).
        New Users Only
        $60.00 OFF

        Coupon * 5

        5 G-coins

        Instant Discount $5.00

        Easy & secure payments
        Local stock with fast shipping
        Customer support
        14-Day return policy
        Get Now
        Why buy from Geekbuying?
        Amazing offers

        Find best offers for smart gadgets at one place.

        Easy & secure payments

        Pay directly via PayPal or Klarna among other payment options.

        Local stock & fast shipping

        Buy from local stock and ship within 48-hour.

        Customer support

        24-hour customer support for all your queries.

        Connect with us
        You have successfully created your account!

        An activation link has been sent to your email address. Activate your account to access the following:

        If you have not received an activation email, please click below to resend the activation email.

        Resent successfully. Please check your email box to get the discount!

        Resend Activation Email
        Resent successfully. Please check your email box to get the discount!
        Leave Continue