Categories

SCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06*0.06mm Laser Focus, 32-bit Motherboard, Replaceable Lens, Engraving Size 410*400mm, Expandable to 935*905mm

Brand: SCULPFUN 3Answered Questions Item Code:517891
G-coin
Get Now
G-coin
QTY: In Stock
Shipping:
Add to Cart Buy Now
28
Bulk Order Rebate
Ship to:
Hong Kong,China
Select the desired shipping method
Shipping Company Estimated Delivery Time Shipping Cost
*Please note: the shipping costs are only estimates; the actual shipping price will be shown on the order page.
0 item(s) added
View CartContinue Shopping
Buy Together & Save

SCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06*0.06mm Laser Focus, 32-bit Motherboard, Replaceable Lens, Engraving Size 410*400mm, Expandable to 935*905mm

$249.00
Selected: 0

Total Price: $249.00

=

Note

1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.

2. For detailed machine instructions, please refer to the manual for parameter settings.

3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.

4. Do not touch the laser with your hands, otherwise, you may burn your hands.

5. Please avoid a strong impact on the machine.

6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.

7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

Highlights

Automatically Controlled Air Assist System
The S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.

Built-in High-Pressure Air Assist Nozzle
S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist.

Ultra-thin 5W Laser
Adopting ultra-thin laser shaping technology, the laser focus of S30 is as thin as hairs and very powerful for engraving or cutting. The S30 5W laser is highly cost-effective and can meet 90% of hobby needs.

Replaceable Protective Lens
S30 series laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Expandable Engraving Area
The original engraving area is about 410x400mm, while it features XY-axis expandable design, so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work.

Upgraded 32-bit Air-assist Motherboard
The latest 32-bit motherboard supports automatic air-assist control and reserves Bluetooth, and SD card offline printing function. (Upgrade Kit sold separately)

Industrial-grade Cutting Accuracy
Extremely solid and high-precision linear slide rail X-axis make it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines.

Sturdy and Durable Aluminum Alloy Frame
Made of high-strength aluminum alloy, its frame can bear up to 50KG weight without damage, and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.

Safety Design
The presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency.

Right-angle Measuring Ruler
There are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraved object.

SCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mmSCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06x0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, 410x400mm, Expandable 935x905mm

Specification

General

Brand: SCULPFUN
Type: Laser Engraving Machine
Model: S30 5W
Color: Blue

Specification

Laser Information:
Diode Laser Output Power: 5W (note: that this is light energy, not electrical energy)
Laser Focus: 0.06x0.06mm
Laser Wavelength: 455±5nm
Focusing Method: fixed focus column + sliding device
Laser Protection Cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles

Machine Information:
Engraving Accuracy: 0.005mm
Engraving Area Size: the standard version is 410*400mm, which can be expanded to 935x400mm or 935x905mm
Machine Power: about 60W

Engraving Area After Installing the Limit Switch:
S30: 380x385mm
S30 Pro: 380x385mm
S30 Pro Max: 370x363mm

Air Pump:
Type: mainboard-controlled air pump
Voltage 12V
Flow: 30L/min
Air Hose Inner Diameter: 7.5mm

Motherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)

Engraving Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone
Cutting Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards

Operating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system
Supported File Formats: NC, BMP, JPG, PNG, DXF, and other image formats
Data Transmission Method: USB connection or Bluetooth wireless connection

Power Input: 110V AC, 50/60HZ 
Power Output: 12V 5A

Weight & Size

Package Weight: 6.7kg
Package Size(L x W x H): 62.3*24*22.5cm

Package Contents

1 x S30 Laser Engraver
1 x Laser Repair Kit
1 x 12V Automatic Air Pump
3 x A4 Size 3mm Wooden Board
2 x Limit Switch
1 x 12V 5A Power Adapter
1 x Power Cord
1 x USB Cable
1 x Air Tube
1 x Installation Tool Kit
1 x Laser Goggles
1 x A4 Metal Backing Plate
Step 1-6 Install the Package
1 x X-axis Assembly
2 x X Profiles
2 x Y Profiles
1 x Control Box Assembly
3 x Support Feet
1 x User Manual

Sculpfun S30 Recommended Settings

Material Name Thickness(mm) Processing Power(%) / Speed(mm/s) / Pass
Plywood 3MM Cutting 300mm/min 1 passes power 100% Air On
Plywood 6MM Cutting 240mm/min 3 passes power 100% Air On
Plywood 10MM Cutting 180mm/min 12 passes power 100% Air On
Plywood / Engraving 3000mm/min power 43%
Basswood 3MM Cutting 240mm/min 1 passes power 100% Air On
Basswood 6MM Cutting 180mm/min 2 passes power 100% Air On
Tung board/cork 10MM Cutting 300mm/min 4 passes power 100% Air On
Tung board/cork 15MM Cutting 300mm/min 7 passes power 100% Air On
Tung board/cork 20MM Cutting /
Black Acrylic 6MM Cutting 180mm/min 5 passes power 100% Air On
Black Acrylic 11MM Cutting /
MDF 3.6MM Cutting 180mm/min 4 passes power 100% Air On
MDF / Engraving 3000mm/min power 35%
Stainless steel / Engraving 180mm/min power 100%
g Kraft paper / Engraving 1800mm/min power 25%
Leatherwear / Engraving 1800mm/min power 15%

Videos

Customer Photos

Be the first to Upload A Photo of this product!

Customer Videos

Be the first to Upload A Video of this product!

Customer Reviews

5out of 5
5 star 50
4 star 0
3 star 0
2 star 0
1 star 0
Write A Review See all 50 reviews
All (50)
Images (0)
Videos (0)

        Questions & Answers

        Support & Firmware

        Learn More

        SCULPFUN S30 5W Laser Engraver Cutter, Automatic Air-assist, 0.06*0.06mm Laser Focus, 32-bit Motherboard,  Replaceable Lens, Engraving Size 410*400mm, Expandable to 935*905mm
        We ensure to all customers that GeekBuying will offer the most competitive price online

        Please fill in the blank and submit it if you found this product sold elsewhere for a lower price. We will work with suppliers to lower down the price as much as we can, and you will receive an email afterwards.

        Your trust and support are highly appreciated.

        Item Code: 517891
        The filed E-mail is required

        Please make sure the information above is filled in correctly so we can offer you an accurate discount. Our wholesale department will get back to you within 24 hours.

        Great, You report on this product has been sent to us. Product info will updated if we can work with our supplier to lower the price(Normally in 48 hours Mon- Fri).
        New Users Only
        $60.00 OFF

        Coupon * 5

        5 G-coins

        Instant Discount $5.00

        Easy & secure payments
        Local stock with fast shipping
        Customer support
        14-Day return policy
        Get Now
        Why buy from Geekbuying?
        Amazing offers

        Find best offers for smart gadgets at one place.

        Easy & secure payments

        Pay directly via PayPal or Klarna among other payment options.

        Local stock & fast shipping

        Buy from local stock and ship within 48-hour.

        Customer support

        24-hour customer support for all your queries.

        Connect with us
        You have successfully created your account!

        An activation link has been sent to your email address. Activate your account to access the following:

        If you have not received an activation email, please click below to resend the activation email.

        Resent successfully. Please check your email box to get the discount!

        Resend Activation Email
        Resent successfully. Please check your email box to get the discount!
        Leave Continue